© Vanderbilt 2017
11
3.1
Wall Mounting
Before you start:
Please turn off the power of the speed dome before connecting the cables.
•
For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the
expansion pipe on the wall should align with the mounting hole on the bracket.
•
For wooden wall, you can just use the self-tapping screw to fix the bracket.
•
Please make sure that the wall is strong enough to withstand more than 8 times the weight of the
dome and the bracket.
•
The bracket in Figure 3-4 Secure the BracketFigure 3-4 is the recommended bracket for this series
of speed dome, and a pendent adapter is required if any other bracket is selected.
•
It is mandatory, to fit the safety rope properly whilst the installation of the dome to avoid that the
dome falls down in both cases: whilst the installation work and in normal mode of operation.
Steps:
1 Remove the protective sticker.
Protective Sticker
Figure 3-2 Remove Protective sticker
2 Remove the cover on the back of the speed dome. Insert the SD card to the SD card slot and install
the cover back.
