© Vanderbilt 2017
14
8 Route the cables through the head cover and bracket.
Figure 3-8 Route the Cables
9 Align the back box of the speed dome with the head cover. Use an Allen wrench to tighten the lock
screws to secure the speed dome and the bracket.
Lock Screw
Figure 3-9 Secure the Speed dome (shown Dome model as example)
10 Remove the protective film of the IR or laser light after you finish installing.
•
The bracket in Figure 3-4 is the recommended bracket for this series of speed dome, and a pendent
adapter is required if any other bracket is selected.
