background image

VCC-5 Operation Manual 

  7 

Vandersteen Audio 

P

ACKING

 I

NSTRUCTIONS

 

    To prevent physical or cosmetic damage always pack the 
VCC-5 in its original box prior to transportation or shipment.  
Please follow these instructions when packing the VCC-5. 

 

1.  Place the speaker  on one side on a padded surface. 

 

2.  Pull the plastic bag over the speaker 

 

3.  Carefully turn the speaker right side up and close bag. 

 

4.  Place one tray, foam side down into the box. 

 

5.  Place the speaker into bottom tray. 

 

6.  Carefully place top tray, foam side up over the speaker. 

 

7.  Close the box flaps and seal with tape. 

 

M

AINTENANCE 

     

The appearance of the VCC-5 can be preserved by ob-

serving a few precautions and performing some simple main-
tenance.  The grille cloth on the VCC-5 can be vacuumed 
using a brush attachment that will not snag the cloth.  The 
top should be treated as a piece of fine furniture.  The wood 
veneers are oiled at the factory and can be maintained with 
an occasional light application of Pledge or a similar prod-
uct. 
     Care should be taken that objects that could mar the finish 
are not placed on top of the speaker.  Do not expose the 
speaker to excessive heat, sunlight or moisture, which can 
damage the fit and finish of the veneer.

     

 

S

PECIFICATIONS

 

 

Driver

:                Magnetically shielded triaxial design com-

 

 

  bining  (2) 6 

1/2

” die-cast basket polycone         

 

               woofers, (1) 6 

1/2

” die-cast polycone mid-

 

 

  range and a  proprietary 1” critically- 

 

               damped, alloy dome tweeter.                  

 

Crossover:

         150, 3500Hz. First order, 6dB per octave. 

 

Phase:

                All drivers in positive absolute phase. 

 

Enclosure:         

1-1

1/2

” think constrained-layer-dampened   

 

 

 MDF. 

      

 

Impedance:       

4 ohms nominal.   

 

Sensitivity:        

86dB at 1 meter with a 2.83 volt input. 

 

Response:          

55Hz to 21,000Hz ± 3dB Proximity Off.                       

 

Amplification:  

100 to 200 watts per channel . 

 

Size:                   

24 

1/4

” wide, 9 

3/4

” high, 17 

1/2

” deep. 

 

Weight:             

68# net, 78# gross. 

 
 
Specifications and design are subject to change without notice due 
to our continuous research and development program 

 

TOP TRAY 

 

 

 

PLASTIC BAG 

VCC-5 

VANDERSTEEN AUDIO 

116 W. FOURTH STREET HANFORD, CA, 93230 

 

 

MODEL VCC-5 CENTER 

FRAGILE 

   

UP

 

   

UP

 

DIMENSIONAL PURITY 

VANDERSTEEN AUDIO 

 

116 WEST FOURTH STREET

 

HANFORD, CA 93230 

(559) 582-0324 

 

www.vandersteen.com 

BOTTOM TRAY 

Summary of Contents for VCC-5









Reviews: