VG-LFL350 350W LED Follow Light User Manual VG-LFL350 350W LED Follow Light User Manual
Please use qualified use qualified stand, and make sure the stand can withstand more
than ten times the weight of device.
2.
Connection with mains
The person involved with the power connection must be qualified, and has the
electrical engineering certificate.
Connect the device to the mains with the power plug.
The earth has to be connected.
Power consumption 450W, input power supply AC100V-240V, 50/60Hz.
3.
Replacing fuse
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse holder on the rear panel with a fitting screwdriver from the
housing (anti-clockwise).
Step 2: Remove the old fuse in the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step4: Replace the fuse holder in the housing and fix it.
4.
Focus
The objective lens cylinder is usually shrinked before leaving factory after connect the
projector to the mains, user may loose the screws and pull out the lens cylinder, till the
white light output circular is clearly presented, locking tightly the two screws again.
When the projection distance is changed, user can follow previous operating steps
and focus the projector.
Ⅳ
OPERATION
1.
Description of the keys
07
06
