VG-MH380 380W Spot Beam Wash Moving Head Light User Manual VG-MH380 380W Spot Beam Wash Moving Head Light User Manual
1. This function will allow you to control each individual fixture‟s traits with a standard DMX
512 controller.
2. The Beast 350 has 16/24 two DMX channels to operate. Please see “DMX Values and
Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any
standard DMX controller. Set your desired DMX address following the setup specifications
that come with your DMX controller.
H
ANGING
D
RAWING
CAUTION!
Use an appropriate clamp to ring the fixture on the truss. Follow the instructions mentioned
at the bottom of the base.
Make sure that the device is fixed properly! Ensure that the structure (truss) to which you
are attaching the fixtures is secure.
Securing the fixture via one safety wire Securing the fixture via two safety wires
Ⅵ
MENU MAP
ADDRESS
001-489 CHOOSE
WORK MODE
DMX CTRL
AUTO RUN
SOUND CTRL
M/SCHOOSE:MAIN ENGINE/SLAVE OFF/ON
LIGHT SWITCH:MANUAL OPERATION LAMP OFF/ON
CHANNEL QTY:MODE1(24CH)/MODE2(16CH)
DISPLAY
LANGUAGE
SCREEN SAVER
SCREEN ROTATE ON/OFF
TOUCH ENABLE ON/OFF
TEST MODE
Manual control lighting has every function
ADVANCED
PAN INVERT ON/OFF
TILT INVERT ON/OFF
P/T RECTIFY:OPTOCOUPLER ON/OFF
PAN OFFSET:4-150,WINDOWS 10
06
07
