WRM-10P AND WRM-40 USER’S MANUAL
REV 3
30
e.
The following screen will be displayed:
If the tap information is correct, press the
[1]
key (
YES
) and
continue to step f
.
If the tap information is incorrect, press the
[2]
key (
NO
) and
return to step d
.
f.
The following screen will be displayed:
1.
YES
Press the
[1]
key (
YES
) if you wish to convert readings to standard temperature.
The following screen will be displayed:
Press the
[1]
key (
COPPER, Tk=234.5
) to select copper as the winding material.
Continue to step g
.
Press the
[2]
key (
ALUMINUM, Tk=225
) to select aluminum as the winding
material.
Continue to step g.
Press the
[3]
key (
MANUALLY ENTER Tk
) to manually enter the Tk value. The
following screen will be displayed:
You can increase the Tk value by 0.5
°
C increments by pressing the
[PAPER
∧
Contrast]
key.
You can decrease the Tk value by 0.5
°
C increments by pressing the
[PAPER
∨
Contrast]
key.
Press the
[ENTER]
key to confirm the temperature setting.
Continue to step g.
2.
NO
Press the
[2]
key (
NO
) if you do NOT wish to convert readings to standard
temperature.
Continue to step g.
Tk:
230.0
°
C
↑↓
to adjust Tk
“ENTER” to accept
WINDING MATERIAL:
4.
COPPER, Tk=234.5
5.
ALUMINUM, Tk=225
6.
MANUALLY ENTER Tk
CONVERT READINGS
TO STANDARD TEMP?
1.
YES
2.
NO
3 LOWER,N,3 RAISE
IS THIS CORRECT?
1. YES
2. NO
