background image

Powering Up and Loading Software 

4-9

Obtaining and Installing Operating Software

Obtaining and Installing Operating Software

Introduction

This section briefly describes how to obtain and install the software into your 
Vanguard 34x device.

Note

After the software has been loaded, refer to the appropriate user documentation 
to configure and use the different software options.

Where to Get 
Operating Software

You can obtain Vanguard Applications Ware Packages that can be tailored to your 
specific needs.

You can obtain operating software for your Vanguard 34x from:

1)

the Vanguide CD-ROM, using the following path:

\VanguardMS\Sfw_imgs\V340

2)

the WWW, using the following URL:

https://secure.vanguardms.com

 

Note

All software must be unlocked using the Software Unlocking Utility. Be sure 
that you have serial numbers for each Applications Ware package before using 
the unlocking utility. If you do not have serial numbers for the Applications 
Ware package contact your distributor, VanguardMS sales or service.

Operating Software

The operating software is compressed in FLASH and loaded into the SDRAM for 
execution. There are a variety of operating software feature sets available for the 
Vanguard 34x. 

• For feature information on the operating software available for your device, 

refer to the Software Release Notice included on the CD-ROM.

• For information on installing the operating software, refer to the 

Vanguard 

Software Installation and Coldloading Manual 

(Part Number T0028) 

included on the CD-ROM.

Optional Software

The Applications Ware packages are divided into licenses available for Vanguard 
products. These licenses include:

• IP

+

 Package

• SNA

+

 Package

• Multi-Service Package

For details about the contents of the Applications Ware License Upgrade packages 
and how they can be obtained, refer to the latest Software Release Notice. 

Note

A license refers to both a legal document that allows you to use features and to 
the software that contains those features. 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 340


























































































































Reviews: