USING THE SPLITTER BOX
The V44S splitter box was designed with mobile recording situations in mind. There are a few
extra inputs and outputs on the splitter box that may come in handy.
Inputs
V44S -
This 5-pin XLR connector connectors the V44S microphone to the splitter box. It routes to
all three outputs.
MID
- you can use two mono microphones with the splitter box for Mid-Side recording in mobile
recording situations. This 3-pin XLR connector routes to the “BOTTOM” output.
SIDE
- you can use two mono microphones with the splitter box for Mid-Side recording in mobile
recording situations. This 3-pin XLR connector routes to the “TOP” and “TOP Ø” outputs.
Outputs
BOTTOM -
This 3-pin XLR connector routes to the bottom capsule of the V44S microphone - or the
“MID” input in the case of using two mono microphones.
TOP
- This 3-pin XLR connector routes to the top capsule of the V44S microphone - or the “SIDE”
input in the case of using two mono microphones.
TOP Ø
- This 3-pin XLR connector routes to the top capsule of the V44S microphone - or the
“SIDE” input in the case of using tw o mono microphones.
This connector is phase-reversed and
transformer-isolated.
This output is specifically for Mid-Side recording in mobile or live situations
where a phase-reversed input is not available on your mixer or DAW. Instead, you can use this
output and a 3rd XLR cable to have all the necessary tracks for Mid-Side stereo.
©2017 Vanguard Audio Labs, LLC. All rights reserved.
5
