SPECIFICATIONS
CARE AND PRECAUTIONS
• When not in use, please store your V44S microphone in the provided padded wooden
microphone case. We recommend keeping the plastic sleeve that the microphone is shipped
in, and keeping it on the microphone when not in use to prevent debris build-up on the
capsule. The provided microfiber storage bag can also be used for this.
• When using for close-mic’d vocals, it is important to use a high quality Pop Filter to protect the
capsule against breath moisture, as well as plosive blasts like “P”, “K”, “T”, etc. Failure to use a
Pop Filter may result in damage to your microphone.
• Always protect your V44S from any hard jolts, drops, and vibrations. Although it is ruggedly
constructed, it is a professional tool and should be treated with respect. Always handle with
care.
• For best performance, stability, & longevity, do not expose the microphone to any moisture or
smoke.
• DO NOT
open the V44S microphone while plugged in.
•
DO NOT
open the V44S splitter box while plugged in. Don’t use this product in or near water,
during a lightning storm, etc. It is intended as a professional microphone only.
Capsule Type:
34mm / 3-micron Gold sputtered Mylar-True Condenser (DUAL CAPSULE)
Polar Pattern/s:
3 patterns per capsule, independently selectable at microphone
Frequency Range:
20Hz-20,000 Hz
Output Impedance:
200 Ohms / electronically coupled
Maximum SPL :
135dB (1% THD @1000Hz)
Equivalent noise level :
<=14dBA (A-weighted)
S/N Ratio:
>=80dB (Ref. 1Pa A-weighted)
Output Connector:
Male XLR 5 pin, gold-plated
Included Accessories:
Padded Wooden Box, Shockmount, Metal case, Power Supply, 5-Pin Cable, Microfiber
Bag
JFET Type:
Proprietary Select Premium Grade, Ultra-Low-Noise and Ultra-Low-Capacitance
Power Requirement:
Phantom Power (48V ideal)
Finish:
Polished Nickel trim / Pinot Noir Body
Warranty:
5 Years
©2017 Vanguard Audio Labs, LLC. All rights reserved.
8