6
www.vanillaip.com
DO NOT DISTURB DND
You can activate or deactivate the DND mode on a per-line basis. If DND mode is activated for a specific
line, all incoming calls to the line will be rejected automatically, and the callers will hear a busy signal.
TO ACTIVATE DND MODE FOR A SPECIFIC LINE:
Press
to enter the main menu.
Select
->Do Not Disturb. The LCD screen displays the incoming lines currently assigned
to the handset.
Press
or
to highlight the desired line, and press the OK soft key.
Press
or
to select Enabled from the Status field.
Press the OK soft key to accept the change.
The
icon on the idle screen indicates the DND mode is activated. You can press the Line soft key
when the handset is idle to check the line status.
The
icon in the bottom of a line indicates that the DND mode is activated for this line. The handset
will reject all incoming calls to the line, and the LCD screen displays the missed call icon
followed
by the number of missed calls
CALL TRANSFER
You can transfer a call to another party in one of the following ways:
BLIND TRANSFER:
Transfer a call directly to another party without consulting.
SEMI-ATTENDED TRANSFER:
Transfer a call when receiving the ring-back.
ATTENDED TRANSFER:
Transfer a call with prior consulting.
TO PERFORM A BLIND TRANSFER:
1. Press the Options soft key during a call, and select Blind Transfer.
2. Do one of the following:
Enter the number or select the handset you want to transfer the call to.
-
Press , or the Transfer soft key.
-
Press the Directory soft key, and select the desired contact.
-
Press the Call soft key.
