background image

25799 Jefferson Ave. 

 Murrieta, CA 92562

  

  

1-800-VANIMAN (826-4626) USA  

 

www.vaniman.com 

 

sales@vaniman.

 SANDSTORM PRESTIGE- 05/21 Page 3

SANDSTORM PRESTIGE

d.  Store idle power tools out of the reach of children and do not allow persons unfamiliar 

with the power tool or these instructions to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

e.  Use the power tool, accessories and tool bits etc. in accordance with these instructions, 

taking into account the working conditions and the work to be performed.

 Use of the 

power tool for operations different from those intended could result in a hazardous situation. 

f.  Keep handles and grasping surfaces dry, clean and free from oil and grease.

 Slippery 

handles and grasping surfaces do not allow for safe handling and control of the tool in 

unexpected situations.

5.  Service

a. 

Have  your  power  tool  serviced  by  a  qualified  repair  person  using  only  identical 

replacement parts.

 This will ensure that the safety of the power tool is maintained.

3. SPECIAL ATTENTION TO THIS PRODUCT

•  Unplug equipment from the wall before changing out the LED light. Do not squeeze or bend 

the light tube. Always wear gloves or use a towel to protect your hands from glass splinters.

•  Always disconnect the unit from the compressed air and power sources before beginning any 

maintenance.

•  Any abrasive material on the o-ring may lead to leakage and early wear of the o-ring. After 

filling, clean the thread and o-ring before applying the lid. 

•  Solvents will create cracks in the jar and weaken the jar (danger of explosion!). Clean the lid 

and tank only with a dry cloth. Do not write or adhere anything to the jar or lid. 

•  Check for damages on the lids and tanks regularly and replace them if there is any doubt of 

the structural integrity. 

•  Before operation, check to make certain the lid is secured properly. Using the product without 

the lid secured will create a serious explosive hazard. 

•  Never operate the blasting units without suitable dust extraction and appropriate protective 

gear. The type of dust extraction should be based on the type dust generated. Ask the proper 

authorities. 

•  Never direct the blasting material towards eyes or unprotected areas of skin. Improper use 

can result in risk of eye or skin injuries. 

•  Never work with the glass door open.
•  Do not depress the foot switch when only the compressed air supply hose is connected. The 

loose hose could wrap around itself and cause serious injury.

•  Maintain equipment and accessories. Check for breakage of parts and any other condition 

that may affect the equipment’s operation. 

ENGLISH

Summary of Contents for MASTER PROBLAST 3











Reviews: