VANNER
Incorporated
Owner’s Manual
LifeSine LSC12-1100 Owner’s Manual - 17 -
k)
Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes.
l)
Follow all battery manufacturer’s specific precautions such as removing or not removing
cell caps while charging and recommended rates of charge
m)
For flooded batteries, add distilled water in each cell until battery acid reaches level speci-
fied by battery manufacturer. This helps purge excessive gas from cells. Do not overfill. For
a battery without cell caps, carefully follow manufacturer’s recharging instructions.
8.
UNIT LOCATION
a)
Locate unit away from battery in a separate, well ventilated compartment.
b)
Never install unit directly above battery. Gases from battery will corrode and damage unit.
c)
Never allow battery acid to drip on unit when reading gravity or filling battery.
d)
Do not operate unit in a closed area or an area having restricted ventilation.
9.
DC CONNECTION PRECAUTIONS
Connect and disconnect DC output connections only after turning unit OFF and removing shore
power.
11.
GROUNDING INSTRUCTIONS
The chassis of this unit should be connected to vehicle chassis. Connections to unit should com-
ply with all local codes and ordinances.
