User manual
Tavara Balance 16.05
5
MIN INSERT
Handlebars height
The height of the handlebars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back.
Determine your own most comfortable height
by using the bike.
To adjust the handlebars:
1. Slightly loosen the screw by using an Allen
key.
2. Slide the handlebars to the correct height
and tighten the screw very firmly again.
Do
not
pull out the handlebars
further
than the
mark. Otherwise the tube will not be deep enough in
the shaft and will risk breaking off, which can lead to
serious injuries.
Position handlebars
You can tilt the handlebars. This influences
the distance from the handlebars to the upper
body. Determine your own most comfortable
position by using the bike.
To tilt the handlebars:
1. Slightly loosen the screws [A] and [B] with
an Allen key.
2. Put the handlebars in the desired position
and then tighten the screws considerably.
3. Slightly loosen screw [C] with an Allen key,
put the handlebars in the correct
(horizontal) position and then tighten the
screw again.
2.
3.
1.
[A]
[B]
[C]
1.
2.
