User manual
Tavara Balance 16.05
7
1. Remove the two screws at the back of the
front light.
In case you cannot easily reach the
screws, slightly loosen screw [A]
and tilt the light a quarter turn, so
the screws are better accessible.
2. Dismantle the rear cover by pressing with
the thumb and index finger at the cavity on
both sides of the front cover and pulling
the rear cover back.
3. Replace the alkaline batteries (1.5 V -
1500 mA) and assemble the rear cover.
Only operate the lighting when stationary to avoid dangerous situations and
the risk of personal injury. Advice: use the lighting in automatic mode.
[A]
2.
+
-
-
+
+
-
3.
1.