6
User manual
Tandems 14.10
MIN INSERT
Saddle height
When the cyclist is sitting on the bicycle
and can put a foot on the pedal in the
lowest position, the saddle height is
correct. Adjust the saddle height in such a
way that the leg is stretched but relaxed in
that position.
To adjust the saddle:
1.
Open the quick-clamp [A].
2.
Slide the saddle to the correct height.
3.
Close the quick-clamp.
Make sure clothing cannot get
caught in the clamp!
If the clamp closes too easily, the
clamping force is too low. In this case,
open the clamp and tighten the nut (B)
a bit more. If a lot of force is necessary
to close the clamp, the nut should be
loosened slightly.
Do
not
pull out the saddle pin
further
than the
marking. The tube will not go into the shank deep
enough and will risk coming off. This can lead to
serious injuries.
[B]
[A]
