User manual
Velo-Plus²
9
Wheelchair transport
If you want to transport a wheelchair on the Velo-Plus², follow the instructions below.
1. Attach the parking brake to the bike by
squeezing the right brake [A] and lock it
with the pin [B].
2. Remove the safety pin.
3. Pull the handle up so the ramp unlocks
and falls down.
4. Push the wheelchair backwards on the
ramp. Push the wheelchair until the ramp
is tilting and locks itself automatically with
a clear noticeable click.
5. Attach the wheelchair with the three belts.
Push the button to release the belt and
attach the hooks to the wheelchair.
Be sure
that the ramp is locking!
Failing to do so may result in
serious injuries.
If the ramp does not lock properly
then use your foot [A] to push
until the ramp locks.
4.
5.
“click” !
[A]
1.
[A]
[B]
2.
3.
