VAN'S AIRCRAFT, INC.
PAGE:
REVISION:
DATE:
01/19/19
0
RV-12iS
42PiS-08
AV-532L CABLE
F-1257B TYP.
F-1281-R STIFFENER
F-1209-R
FUSELAGE FRAME
F-00217
TYP.
PLASTIC
TIE-WRAP 4"
TYP.
DAB OF RTV OR
FUEL TANK
SEALANT
TYP.
Step 1: Route the AV-532L cable up the F-1281-R stiffener, passing through the lightening holes in each of each fuselage frame
as shown in Figure 1.
NOTE: Airframes with dual pass through holes in the F-01202B-1 should route the AV-532L cable through the foremost
hole.
Step 2: Following the path of the WH-00136 forward of the
F-01207C-L, route the AV-532L cable forward through the airframe
and up through the wire pass-through hole in the F-01202B-1 as
shown in Figure 1.
Step 3: Install the F-1257Bs onto the F-1281-R stiffener to
protect the AV-532L cable at all points where the cable
enters/exits the stiffener. See the Detail View of Figure 1.
Step 4: Cut 3 strips of MS21266 grommet to 4 3/8 in. [111.1mm] to fabricate the F-00217s.
Step 5: Install the F-00217s into the fuselage frames as shown in the Detail View of Figure 1.
Step 6: Once the entire AV-532L cable has been routed and positioned correctly, secure the
AV-532L cable to the F-1281-R stiffener with tie-wraps as shown.
FIGURE 1: ROUTING THE AV-532L CABLE
F-01202B-1
F-1207C-L
AV-532L CABLE
6 [152.4 mm]
