42PiS-09
RV-12iS
0
01/19/19
PAGE:
REVISION:
DATE:
VAN'S AIRCRAFT, INC.
FIGURE 1: ROUTING THE AV-532L CABLE
THROUGH THE V-STAB ASSEMBLY
AV-532L NUT
AV-532L LOCK WASHER
MS21919DG6
AV-532L CABLE
F-00204
AN525-10R8
Step 1: Reinstall the V-Stab Assembly to the airframe, while simultaneously routing the AV-532L cable
through the F-00204. See Figure 1.
A piece of safety wire passed through the F-00204 prior to reassembly can be used to pull the
AV-532L cable up through the F-00204 if necessary.
Step 2: Connect the ring terminals on the end of the AV-532L cable onto the studs of the AV-532L
antenna with the included fasteners as shown in Figure 2.
Step 3: Clasp the cushion clamp over the AV-532L cable and secure the cushion clamp to t he F-00205
relieving any strain on the ring terminals. See Figure 2.
Step 4: Reinstall the VS-1213 onto the V-stab assembly as shown in Figure 3.
FIGURE 2: CONNECTING THE AV-532L CABLE
AV-532L ANTENNA
F-00205
VS-1213
12X AN507C632R6
V-STAB ASSEMBLY
V-STAB
ASSEMBLY
FIGURE 3: INSTALLING THE V-STAB FAIRING
