www.fmiproducts.com
125525-01E
20
6. Place the small top right log as shown in
Figure 28. The bottom of the log is shaped
to fit onto the recessed areas of the top
right log and the front right log. The re-
cessed areas are painted yellow.
Figure 28 - Installing Log
Small
Top
Log
INSTALLATION
Continued
Description
Qty
Front Left Log
012 001 007
1
Front Right Log
013 002 008
1
Rear Log
014 003 009
1
Top Left Log
016 005 011
1
Top Right Log
015 004 010
1
Small Top Right Log 006 006 006
1
LBG18-RM LBG24-RM LBG30-RM
Front
Right Log
Top
Right
Log
FIBER LOG MODELS
LBG(18,24,30)-CM
Note: Your appliance may vary from model
shown but log placement will be the same.
1. Place rear log in back corner sections of
base assembly as shown in Figure 29. The
rear log is designed to lean back slightly
when installed correctly.
Figure 29 - Installing Rear Log
Figure 30 - Installing Ramp Log
Metal Tab
Metal Tab
Rear Log
Ramp Log
2. Place ramp log in center of base assembly
as shown in Figure 30. Make sure the side
marked BOTTOM is setting down on the
base. The log will sit behind the metal
base as shown in Figure 25, page 19.
3. Position front left log against left side of
grate prongs (see Figure 31, page 21).
