www.fmiproducts.com
125525-01E
23
INSTALLATION
Continued
Figure 39 - Installing Fiber Ramp Log
Figure 40 - Installing Left/Right Front Logs
Figure 41 - Installing Left Ember Bed Log
Ramp Log
Left Ember
Bed Log
Left Front
Log
Right Front Log
Metal
Tab
3. Place front left (18" D-064, 24" D-057 & 30"
D-038) and front right (18" D-065, 24" D-058
& 30" D-039) logs as shown in Figure 40.
4. Place left ember bed log (18" D-073, 24"
& 30" D-048) as shown in Figure 41. The
log has groove on one side that sets on the
ember bed pan. The back side of this log
needs to rest against the front of the base
assembly. Make sure the flame from the
ember pan does not touch the ember bed
log.
5. The right ember bed log 24" & 30'' (D-
047) has a hole in the log that sets on
the grate finger and the other end rest on
the fireplace floor, place log as shown in
Figure 42. The right ember bed logs for 18"
(D-072) has a groove on the side that sets
on the ember bed pan and the back of the
log needs to rest against the front of the
base. Make sure the flame from the ember
pan does not touch the ember bed log. The
back side of this log needs to rest against
the front of the base assembly, make sure
the flame from the ember pan does not
touch the ember bed log.
Figure 43 - Installing Left Middle Log
Figure 42 - Installing Right Ember Bed Log
Right Ember
Bed Log
Left Middle
Log
Hole
Underneath
Grate Prong
6. The left middle log (18" D-066, 24" & 30"
D-040) has a groove on the bottom to sit
on the chassis and has to sit on the tab on
the back of the left front log as shown in
Figure 43.
