www.fmiproducts.com
125527-01A
20
iNStallatioN
Continued
6. Place the small top right log as shown in
Figure 27. The bottom of the log is shaped
to fit onto the recessed areas of the top
right log and the front right log. The re-
cessed areas are painted yellow.
Figure 27 - Installing Log
Small
Top
Log
Description
Qty
Front Left Log
012 001 007
1
Front Right Log
013 002 008
1
Rear Log
014 003 009
1
Top Left Log
016 005 011
1
Top Right Log
015 004 010
1
Small Top Right Log 006 006 006
1
LBG18-RM LBG24-RM LBG30-RM
EMBER PLACEMENT - BGE SERIES
BURNER SYSTEMS
WARNING: Do not use any
other ember material not sup-
plied with this unit.
WARNING: Do not operate
unit without ember material
correctly in place as shown in
Figures 27 & 28. Do NOT place
ember material anywhere else
on the unit. Use only ember ma-
terial supplied with unit. Exces-
sive or incorrectly placed ember
material may produce carbon
monoxide or soot.
1.
Ember Chunk Placement.
The BGE2436
burner systems include three ember
chunks that are designed to fit over shoul-
der screws on the ember pan burner. The
bottom of each ember chunk has a hole
for securing the ember chunk in place
when it is placed over a shoulder screw.
Place the ember chuncks as shown in Fig-
ure 28 on page 21 by placing the ember
chunk with the number "1" on the left, "2"
in the center, and "3" on the right. These
numbers are embossed on the back of
each piece for identification purposes.
Please note that BGE18 burner systems
do not include ember chunks.
Figure 26 - Installing Logs
Top Right Log
Front Left
Log
Front
Right Log
Top Left Log
Front
Right Log
Top
Right
Log
