www.fmiproducts.com
125527-01A
21
iNStallatioN
Continued
Figure 30 - Placement of Rock Wool for BGE Series
(shown with Platinum Bright Embers)
Figure 29 - Platinum Bright Embers for BGE Series
Flat Front Burner
Ember Material
Rock Wool
Figure 28 - Ember Chunk Placement BGE2436 Series
Ember Chunk #1
Ember Chunk #2
Ember Chunk #3 Flat Front Burner
2. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Follow instructions for the ember material
you choose. Should embers need replac-
ing, see
Parts
, page 34.
Platinum Bright Ember placement.
Add
embers to front, flat burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
flat burner just behind horizontal ports as
shown in Figure 29.
Rock Wool placement.
Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 30.
3. Add lava rock and small decorative logs
around base of heater if desired.
DO NOT
place rock or additional logs on front
burner or on logs.
Placing any material
on unit other than ember material on front
burner may result in production of carbon
monoxide or soot. Use lava rock to hide
wires from switch/log to control valve.
Place switch/log so the switch is easy to
access.
