www.fmiproducts.com
125784-01D
23
8. Place the rear left top log on top of the
middle log and the rear log. Match the
pin on the middle log with the round hole
in the bottom of the rear left top log (see
Figure 45. The rear log has a flat area for
the back of the rear left top log to set in.
9. Place the rear right top log on top of the
middle log and the rear log. Match the pin
on the middle log with the round hole in
the bottom of the rear right top log (see
Figure 45). The rear log has a flat area for
the back of the rear right top log to set in.
INSTALLATION
Continued
Figure 44 - Installing Middle Log
Middle
Log
Ramp Log
Figure 46 - Installing Ember Logs
Left Ember Log
Right Ember Log
7. Place the middle log onto the ramp log as
shown in Figure 44. The middle log has
two tabs on the bottom to position from
left to right on the ramp log. The front of
the middle log should be touching the top
left front log and top right front logs.
Figure 45 - Installing Rear Left Top Log
and Rear Right Top Log
Rear Left
Top Log
Rear Right
Top Log
Metal Pins
10. Place the left and right ember logs as
shown in Figure 46. Do not place the logs
where they will be touched by flame. They
are intended to cover the sheet metal on
the front left and right sides of the base
assembly.
