www.fmiproducts.com
125784-01D
29
OFF BUTTON
This button switches off the appliance. If it is
pressed and held for more than 40 seconds,
the configuration menu is accessed.
LEFT, MIDDLE AND RIGHT BUTTON
These buttons change their function as shown
by the on-screen labels. For some screens a
button may have no function and is inactive.
The active buttons for a particular screen are
initially lit for 5 seconds to indicate that they
are active.
OPERATION
Continued
REMOTE CONTROL OPERATION
The remote control contains:
1. LCD display
2. Four buttons:
OFF button
Left button
Middle button
Right button
3. Battery Case (on the Back)
Batteries
(Back Side)
Left Button
Left
Button
Middle
Button
Middle
Button
OFF Button
Right
Button
Right
Button
LCD Screen
Figure 62 - Remote Control
LCD DISPLAY
The LCD screen shows information about the
instructions given by the user (desired status)
and the current situation of the device (actual
status). It also helps us select our choices,
see Figure 63.
•
A: Day of the week
•
B: Time
•
C: Signal Strength
•
D: Selected working mode
•
E: Selected setting
•
F: Current Flame status
•
G: Current fan status
•
H: Current room temperature
•
I: Child lock status
•
J: Button labels (explained below)
Figure 63 - LCD Display
Figure 64 - Screen Changes
Bottom Row
Mon 00-02
Configuration
Pairing
Off
Yes
Back
Select
Off
0.5°C
Thermostatic
Gap Temp
Programming
The screen changes depending on the input
from the buttons, but the bottom row always
displays the button function labels (see Figure
64). The functions of each button depends on
the options available on the current screen
(except for the OFF button which has always
the same function).
Note:
The bottom row of the screen is
indicating buttons functionality. In this case:
•
LEFT (
) button decreases the flame level
•
MIDDLE (
) button increases the flame level
•
RIGHT (Back) button goes back to the
previous screen (see Figure 64).
