C
hapter 5 >> Main Menu
24
English
9
Confirm the
Enable Limits/Disable Limits
function pressing the
OK
button. You will
be prompted to decide whether to use the West/East setting Limits setting value.
10 The method to position motor is selected in the
Continuous/Step (Impulses)
/
Time
(Seconds)
menu. If you press the
Arrow (
◄/►
)
buttons once in the Continuous mode,
selected TP signal of the satellite is locked or the motor stops to move. In the
Step
(Impulses)
mode, you can select
Steps (Pulse)
from 1 to 10. The motor changes its
position according to the selected step if moved to the left or right (depending on the
motor).
In the
Time (seconds)
mode, you can select time (seconds) from 1 to 20. The
motor changes its position according to the selected step if moved to the left or right
(depending on the motor).
USALS
1 Select
Motor Setting
using the
Arrow
(
▲/▼
)
buttons and press the
OK
button.
2
Select
Satellite
menu using the
Arrow
(
▲/▼
)
buttons and press the
OK
button.
Satellite list appears. Select satellite using
the
Arrow (
▲/▼
)
buttons and press the
OK
button. Bulleted list indicates selected
satellites.
3
Press the
RED
button to save selected
satellites and then press the
Back
button.
4
If you press the
YELLOW
button, on-
screen navigation menu is highlighted. Use the
Arrow
buttons to move the motor to
the west, east, north, and south in order. Position of the motor can be restricted to the
software setting limits (West/East) using the
RED / BLUE
buttons.
5
Press the
YELLOW
button to highlight Satellite.
• This function may not work depending on the type of USALS program.
6
Enter the value of 000.0 E/W (latitude) and 000.0 N/S (Longitude) and then press the
OK
button on the
Go to X
menu.
Motor changes its position according to the selected satellite.
7
Confirm the
Enable Limits/Disable Limits
function pressing the
OK
button. You will
be prompted to decide whether to use the West/East setting Limits setting value.
• This function may not work depending on the type of USALS program.
• Press
OK
in
Go to Reference
menu, the motor moves at zero longitude/latitude.
Installation
Summary of Contents for HD 8000S
