5. Installation:
Installation
6
NexStar 3 External 3.5” HDD Enclosure:
Preparing the hard drive:
(1) Set the hard drive jumpers to MASTER or
SINGLE DRIVE ONLY. Please refer to the
documentation included with your hard
drive for information on how to accomplish
this.
Preparing the NexStar 3:
(1) Remove the side of the NexStar 3 with the
power and USB connection ports. If it has
previously been screwed in place, remove
the screws first.
(2) Carefully slide out the side approximately
3 inches.
( pic 5.1-A )
(3) Unplug the red and white cable for the LED.
(4) Slide out the rest of the side.
5.1. Hardware Installation:
( pic 5.1-A )