background image

Creating a New Partition 

10

7. Creating A New Partition: 

For Windows XP/ Vista/7 Users:

( figure 7-A )

( figure 7-B )

( figure 7-B )

( figure 7-A )

( figure 7-B )

Most  hard  drives  should  come  with  a  CD  that 
includes an installation program. If not, a download 
should  be  available  from  the  manufacturer's 
website. The best way to partition a new hard drive 
is  by  using  the  manufacturer’s  program.  Please 
refer to your hard drive’s documentation for further 
information on formatting or partitioning the hard 
drive.

Right click on “My Computer” and choose 

“Manage”.

Under “Storage” on the LEFT pane, select 

“Disk Management”.

Windows should now give you the option to 

initialize the disk. If not, locate the new disk, 

right-click on the new disk (where it reads 

“Disk #”) and choose Initialize. This step may 

not be required for some hard drives.

Go through the wizard.

Once complete, locate your hard drive in 

the bottom right pane. Right click on the 

area with a status bar (to the right of the 

“Disk #” area) and choose New Partition.

(1)

(2)

(3)

(4)

(5)

WARNING : 

Doing the following setup will erase any existing 
data on the drive. 

1

3

2

NOTE : 

Summary of Contents for SuperSpeed NexStar 3
















Reviews: