VANTERRA Admiral, Owner'S Manual

1. Deflate the sup board first. Ensure the air inside is totally discharged.
2. Use sandpaper or wire brush to polish the surrounding of the leaking hole
until the PVC layer shows up.
3. Use soap water or isopropyl alcohol to clean away dust, dirt or crumbs around
the leaking hole. After that, wipe the leaking hole dry.
4. Cut the repairing patch into appropriate size. (the size should be big enough
that it could cover more 1 to 2 cm from the leaking hole)
5. Stick the repairing patch accordingly. Never pill it off once it is stuck securely.
6. Press the repairing patch with even force to further ensure it is stuck securely.
7. Leave it alone for about 2 to 3 hours to let the glue thoroughly dry. (You can
place some heavy material on the patch for better result)
8. Inflate the sup board. Check if there is still leaking. Place the leaking hole
around your ear and listen carefully to check if there is still air coming out. Leave
the sup board alone overnight and check it again the next day.

HOW TO USE REPAIRING PATCH

PACK UP

1

2

3

4

5

6

7

8

9

Page11