~ 44 ~
COM3000 Integrator’s
Installation Manual
Date: January 2024
Version 1.1
Following is a detailed list of information available on the
PairingInfo
page.
Chassis
CardIP
RID
CAM_ID
Serial_Number
Authorized
Paired
SW_Version
Up_Time
Upgrade
This field reports a unique identifier for the chassis. In systems that contain multiple chassis,
this can be used to identify each card in the system.
This field shows the IP address of the COM51 card that resides in the chassis and slot
combination to its left. If you want to know the DHCP IP address, use the URL:
http://192.168.3.18/cgi-bin/webcmd?screen=ifconfig
This field is also a link to see the Syslog for that card.
This field reports the DIRECTV Receiver ID, or RID. This value is the first of two parameters
required to obtain an authorization on the DIRECTV network.
This field reports the DIRECTV CAM ID. This value is the second parameter required to obtain
authorization on the DIRECTV network.
You can click on the hyperlink in this column to be taken directly to that card’s CAM Log (see
Section 6.2.4
for more information on reading a card’s CAM log).
This field contains the unique electronic serial number of the board assigned at the time of
manufacture.
This field reports whether the COM51 card’s CAM has been authorized.
A value of ‘1’ indicates that the card has been authorized, thereby enabling the card to receive
DIRECTV programming.
A value of ‘0’ indicates that the card has not been authorized.
This field reports the pairing status of the CAM card.
To be capable of receiving an authorization to the DIRECTV network, the RID and CAM data
must first be paired.
If this has not happened, then the card cannot be authorized until the pairing is resolved.
A value of ‘1’ indicates that the RID and CAM are successfully paired; a value of ‘0’ indicates that
they are not.
This field reports the software version that currently resides on the COM51 card.
This field gives an indication of how much time has elapsed since the card was last rebooted or
powered up.
By checking this box for a specific card, you can upgrade multiple cards at a time.
