Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
55
Wi-Fi – Client Mode
When the Gateway is set as a client on a wireless network, the page below allows you to
make changes to the network settings.
The parameters will be overwritten if you change the settings under
A wwan0 port will be added automatically when client mode is being configured.
Description of the numbered areas
1.
Switch to
Client mode
2.
Select DHCP protocol to automatically get an IP or Static Address protocol to specify an
IP for the Gateway
3.
Select a wireless network for internet access
4.
Click
Scan WIFI
to refresh the Wi-Fi list if the target Wi-Fi is not identified
5.
Select the MAC address of the Wi-Fi, or leave it to Auto if not clear
6.
Input the password of the Wi-Fi
7.
Confirm that the target Wi-Fi has internet connection
When the Gateway is successfully connected as a client, there will be the network
information next to
Scan WIFI
button.
