Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
99
When the alarm rules are created, you can set the parameters for pushing an alarm on the
Alarm Broadcast
page.
Description of the numbered areas
1.
Set the interval for an alarm, 120 seconds by default
2.
The maximum storage space for the alarm log is 1024M by default
3.
Select to enable result output or not
4.
Select to output the alarms to the alarm log or alarm log + email
If you choose the latter, please add information about the email.
5.
Input an email account for receiving the alarm messages
6.
Input the outgoing server address (check the settings of the email server in use)
7.
Enable encrypted transmission if the server supports
8.
Input an email account for sending the alarm messages (could be same as the receiving
email)
9.
Toggle the server validation or not
10.
If server validation is enabled, you need set the password
When you are all set, you can send a test email to check if the settings are ok, then submit
the settings.
The alarm logs will be displayed on the
Alarm Record
page if any rules are triggered.
