Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
26
2.1
Setting up the Gateway
Before you proceed with the configuration of the Gateway, follow the steps below to
finish hardware connection.
For C335L
1.
Use the mounting bracket and screws to install the Gateway to a secure place;
2.
Unscrew the cover plate from the SIM & SD slots on the left side of the Gateway;
3.
Insert an activated SIM card and an SD card into the corresponsive slots with the
gold-colored contacts/pins facing down;
4.
Push the cards to secure them;
5.
Place the cover plate back over the slots and tighten the screws;
6.
Install the rubber stick antenna to the Wi-Fi/BT antenna connector (RF2) and the
sucker antenna to the 4G/LTE antenna connector (RF1), then tighten the connectors;
7.
Connect one end of an Ethernet cable to the Ethernet port of the Gateway and the
other to your PC (the Ethernet port is used as a LAN port by default);
