Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
33
2.3
Interfacing with Vantron Gateway Management Platform
BlueSphere GWM, Vantron gateway management platform, is a web-based console
where multiple gateways/routers could be managed in groups to provide the required
information. If the gateway/router supports data collection/upload protocols, users can
also set up the data collection tasks, collection variables, uploading rules, etc. on the
platform.
Before you can use the BlueSphere GWM for remote management of gateways/routers,
please make sure the following prerequisites are met:
•
You have obtained a license for login to the BlueSphere GWM
•
DMP agent is installed on the target gateway/router
•
DMP agent is “enabled” on the configuration page in VantronOS (Refer to
for the configuration)
•
The serial number of the gateway/router is added to the BlueSphere GWM
2.4
Network Connectivity
When the Gateway has network connections, the status page may display like below.
2.4.1 Ethernet Network Connectivity
The default WAN settings allow your gateway to join an Ethernet network without any
additional configuration.
The Gateway uses a DHCP protocol to assign IP addresses, subnet masks, default gateway
addresses, and Domain Name System (DNS) server addresses by default. If you switch
DHCP to static protocol, you’ll need to set all of these IP addresses manually.
