Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
60
If the 4G module is not AT&T and Verizon pre-certified, the provider information will not
be available in
Advanced Setting
, and the
General Setting
options are the same as those
for pre-certified 4G modules. You can keep the default values of the fields unchanged.
The
Run Log
next to the
Advanced Setting
tab displays the last 50 log entries of the module.
Under
4G traffic
tab, traffic information measured in real time or on the monthly and daily
basis is available. You can also set the interval for submitting the temporary in-memory
database to the persistent database directory.
3.5.4
Static Routes
This is an advanced function allowing you to specify interface rules for route access.
Example:
Requirement: When the Gateway has 4G and WAN network interfaces, the internal
network (192.168.0.0 - 192.168.255.254) is accessed via the WAN interface by the internal
server. Other data access is realized via the 4G interface.
Click
Add
and select an interface to configure.
Description of the route type:
Type
Description
Unicast
The route entry describes real paths to the destinations covered by the route
prefix.
Local
The destinations are assigned to this host. The packets are looped back and
delivered locally.
Broadcast
The destinations are broadcast addresses. The packets are sent as link
broadcasts.
Multicast
IP datagrams are sent to a group of interested receivers in a single
transmission. It is not present in normal routing tables.
Unreachable
The destinations are unreachable. Packets are discarded and the ICMP
message of host unreachable is generated. The local senders will receive an
EHOSTUNREACH error.
