Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
98
In the Data Encapsulation page, you can upload encapsulated data or configure the
encapsulation format of the data.
Description of the numbered areas
1.
Description of the built-in data encapsulation format
2.
Click to upload. json data for encapsulation
4.2.7
Alarm
Under
Alarms > Alarm Config
, you can add alarm rules for the variables. The device will
alarm when a rule is triggered and the alarm mutes when the condition changes to not
meeting the rule.
Description of the numbered areas
1.
Set a name for the alarm rule
2.
Select the variable for the alarm rule to be applied to
3.
Input the alarm message to be display in case of an alarm
4.
Select to enable the alarm rule or not
5.
Set the thresholds for triggering the alarm (thresholds will be applied from top down)
6.
Set an alarm level (under normal level, no alarm will be triggered)
7.
Click “+” to add a trigger condition, click “-” to delete a trigger condition
8.
Select a data linkage
9.
Click to save the alarm rule
