Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
11
Description of the BTN button
•
When a system upgrade drive is inserted in the SD slot or USB port, a short press of
the button for about 2 seconds will cause the status indicator to blink, suggesting
system upgrade is in progress. Once the upgrade finishes, the system will reboot
(from eMMC flash).
•
When the button is pressed and held for 3-10 seconds, user configurations and
custom settings will be removed and the Gateway will be factory reset. Once finishes,
the system will reboot.
•
When the button is pressed for over 10 seconds, user partitions will be formatted
and data in such partitions will be cleared.
1.4.2
Left side view
Interface
Description
1
4G diversity antenna
2
Debug port
3
Micro SIM slot
4
Micro SD slot
5
Wi-Fi & BT antenna
6
9V-36V DC power terminal
7
4G primary antenna
1
2
3
4
5
6
2
6
7
