Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
C335 Series Edge Computing Gateways | User Manual
90
Description of the numbered areas
1.
Enter a device name
2.
Input a slave address between 0 and 255
3.
Choose to enable the device or not
4.
Set an interval for data collection
5.
Set a start bit for the register
6.
Select the data source for distribution (provided there is collected data)
4.2.3
Add Variables to the Device
After configuration of the PLC for data collection, click
Add
under the
Variable List
next to
the channel and device to set the variables for the PLC.
