Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | M10 Pro User Manual
3
General Safety Instructions
For your safety and prevention of damage to the Product, please read and observe carefully
the following safety instructions prior to installation and operation. Keep this manual well for
future reference.
-
Do not disassemble or otherwise modify the Product. Such action may cause heat
generation, ignition, electronic shock, or other damages including human injury, and may
void your warranty.
-
Keep away from heat source, such as heater, heat dissipater, or engine casing.
-
Do not insert foreign materials into the USB port or any other opening of the Product as
it may cause the Product to malfunction or burn out.
-
Use only the adapter, power cord, and batteries that are approved for use with this
Product. Otherwise, it may cause fire or explosion.
-
Be sure that nothing rests on the power cable and that the cable is located at a place
without risk of trips.
-
Cut off the power before inspection of the Product to avoid human injury or product
damage.
Precautions for Power Cables and Accessories
Use proper power source only. The Product is designed to use 5V DC (9V DC for fast
charge). Make sure the supply voltage falls within the specified range. Always check
whether the Product is DC powered before applying power.
Place the power cable properly at places without extrusion hazards.
