Vantron VT-M2M-BTA-DE ThingWorx Installation and Setup Guide
Copyright © 2015 PTC Inc. and/or Its Subsidiary Companies. All Rights Reserved.
5
Connect the VT-M2M-BTA-DE to a local machine and peripheral
1.
Insert a network cable to the VT-M2M-BTA-
DE device. Ensure that the VT-M2M-BTA-DE
device is connected to a cable which has an
internet connection. In this sample, ETH1
port is preferred.
Note: ETH1 port is “eth0” in OS, ETH2 port is
“eth1” in OS. The “eth0” port is set to obtain
an IP address automatically via DHCP. The
static IP address of “eth1” is 192.168.1.1.
2.
Connect the VGA display to VT-M2M-BTA-DE.
3.
Connect the USB keyboard to VT-M2M-BTA-DE.
4.
Login to the device. Enter
root
as the login
username, and
root
as the password
(default).
