Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-3588 | User Manual 16
2.4.8
J15 Backlight connector (8)
The VT-SBC-3588 implements a backlight connector (1 x 6 x 2.0mm) that is designed to
connect a backlight to increase readability of the LCD in low light conditions.
Pinout description:
Pin
Name
Type
Description
1
VCC12V_LCD
P
12V power supply for backlight
2
VCC12V_LCD
P
12V power supply for backlight
3
PANEL_BKLTEN
O
LCD backlight power control output,
5V level
4
PANEL_BL_PWM
O
LCD backlight PWM control output,
5V level
5
GND
P
Ground
6
GND
P
Ground
2.4.9
J9 HDMI (9)
The VT-SBC-3588 has a standard HDMI Type-A interface for image output with a resolution
up to 4096 x 2160 @60Hz, and it supports HDMI 2.1 protocol.
2.4.10
J17 eDP (10)
The VT-SBC-3588 implements an eDP interface (1 x 30 x 0.5mm) for image output with a
resolution up to 4096 x 2160 @60Hz, and it supports HDMI 2.1 protocol. It is
recommended that you use LVDS shielded twisted pairs to connect the interface for
improved transmission reliability.
Refer to the next page for the pinout description of the interface.
Pin 1
Pin 1
