Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-3588 | User Manual 44
3.
When the device information is displayed under the command, the Board is an ADB
device and you can copy the serial number (squared as shown above) for the next step;
4.
Input the following command line to install the app;
adb -s
<serial number>
install
<APP path>
5.
The installation will be executed after the command line is input and the result of
installation will be displayed below;
6.
The newly installed app will be displayed on the App drawer in the Alphabetic order.
In step 4 shown above, you can drag the .apk file from the local directory to the
command line to replace the <App path> you typed in manually.
4.4
Image Flashing on a Windows Host
Whenever a new image is available, Vantron will provide a release package consisting of
all the tools/files necessary so that you can flash the image as needed.
4.4.1
Prerequisites
•
The VT-SBC-3588
•
A host computer running Windows 7 or later
•
A USB cable (Type-A to Type-C)
4.4.2
Driver installation
1.
Follow the steps in 4.2 to finish ADB setup;
2.
Unzip the release package, and open the directory of the upgrade driver (path: \ SW \
DriverAssitant_vxxx, and locate the
DriverInstall.exe
;
