- 17 -
When the camera is recording video, pressing the Emergency/
Camera button will capture a snapshot.
4.9 Taking a Snapshot
An external GPS receiver mount is required to use the camera’s on
board GPS function. This can be purchased from Amazon.
1. Install the External GPS Mount onto the camera instead of the
original mount.
2. Plug the Mini USB Connector into the GPS Mount to power it.
3. Once charged, the camera will power on. Recording will
commence if a Micro SD card has been inserted, just press the
Confirm Button to stop recording.
4.
Press the MENU button to enter setup, go to “GPS Setup”►“GPS
Setup” to activate the camera’s GPS function.
5. The GPS receiver will start to search for a GPS signal, this is
represented by a gray GPS icon on the screen. Once the GPS
signal has been received and locked, the icon will turn orange.
4.10 Connecting External GPS Receiver (Optional Accessory)
0
2018/05/03
00:00:23
05:00:53
1080FHD
3
0
2018/05/03
00:00:23
05:00:53
1080FHD
3
