CLEANING / MAINTENANCE
CLEANING /STORAGE
Always ensure before cleaning or maintaining the Vapamore MR-750 Ottimo that it is
switched off and unplugged from the wall outlet and cooled down completely.
Only clean the outer surface with a water moistened cloth. Do not use any cleaning
agents, abrasives or alcohol
Fig.1
ACCESSORIES
The boiler should be emptied before storing for any
extended period of time (30 days or more) or emptied
every 3 months of use to help flush out and remove any
debris that may have collected in the boiler. Make sure
the steamer is unplugged and completely cooled down
before emptying the boiler. The boiler drain is located on
the underside of the steamer. The steamer MUST be
100% cooled down and have no pressure stored in the
boiler to remove this cap. With the supplied tool, remove
the drain cap to drain the boiler then replace and tighten
the cap. Do not overtighten the cap as you may damage
the seal. (Fig.1)
GO TO VAPAMORE.COM TO SEE THE MR-750 OTTIMO INSTRUCTIONAL VIDEO
Parts, extension tubes and accessories can be stored in the supplied accessory storage
bag and the storage basket located on the back of the steamer. The steam gun and hose
can remain plugged into the steamer and also be stored in the storage basket.
Replacement accessories and parts are available to order online at vapamore.com or by
calling Vapamore at 480-951-8900.
Boiler
drain
!
Never ship or transport the machine with water in the boiler tank.
The boiler tank MUST be completely emptied prior to shipping or transporting the
machine. Falure to do so can cause water to enter the machines internal parts and void
the warranty.
Make sure all the o-rings are in place on the accessory tools and adapters. A silicon lube
can be used on these o-rings to help maintain a long use life.
!
or
detergents and wash cycle. *Air dry dry only, do not use any fabric softners as these will
leave a residue on the pad and cause cleaning issues when using the pad.
BOILER TANK & DRAIN
