background image

20

21

HVLP GRAVITY FEED SPRAY GUN TIP SIZE

APPLICATION GUIDE

Tip Size  Common Applications

For most fine finishing. Spot repairs and detail painting with primer, base coats, clear coats, single 

stages, low VOC.

1.0

1.3
1.4

1.5

1.7

2.0
2.3

Clear coats, base coats, water based coatings and single stages. Produces a fine finish.
A good all-purpose tip suitable for general materials including single stages, base coats, water based 

coatings, clear coats. This larger tip works well with thicker clear materials.
A versatile tip for base coats and single stages. Potential risk of orange peel if used to spray clear 

coats. Tip can also be used to spray primer sealers, conversion varnish, water base clears and 

lacquers.
Widely used for primer, this tip is well suited for coating larger surfaces, thick layers and spotted 

effects. Will apply thick primer quickly. Best suited for thicker materials such as flakes, heavy solid 

materials, primer, primer sealers, polyester primers, varnish, polyurethane, oil base paints, enamels, 

epoxy, plastic adhesives, floor paving paints, latex, splatter paints, multi-fleck, etc.
This large tip is suitable for heavy solid materials such as: surface primer, primer sealers, polyester 

primers, rust proof coatings and industrial finish coatings.
Very large tip designed for heavy flows and fast coverage. Commonly used for high build primers, 

fiberglass resins, epoxy, stone finish paints, texture coatings, industrial primers, latex, etc.

Always consult your paint supplier for specific manufacturer’s application guidelines. Tip size recommendations serve 

as a starting reference only and are not intended as a specific application guide for all coating material brands. They are 

not meant to imply than any given air cap and fluid tip combination cannot be used to successfully spray a given coating 

material. Spraying technique and personal preference must also be considered.

Touch-Up Gun

Production Guns

SPRAY GUNS AND ACCESSORIES

AVAILABLE FROM VAPER

For up-to-date product information, and for a Spanish version of this manual, 

please visit our website at: www.titan-us.com and click on “Literature”  or scan 

the QR Code at left with your smart phone. 

For other spray guns and accessories please visit our website at:  

www.titan-us.com

NOTES

Summary of Contents for 19220














Reviews: