After opening the carton, unpack your new product and related parts and accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against
the photograph on carton. If any parts are missing, please call factory customer service at
1-800-386-0191.
Do not operate this product if damaged during shipment, handling or
misuse. Do not operate the product until the parts have been replaced or
the fault rectified. Failure to do so may result in serious personal injury or
property damage.
All damaged parts must be repaired or replaced as needed prior to operating this product.
Check to see that all nuts, bolts and fittings are secure before putting this tool into service. If you
have any questions, or require assistance with damaged or missing parts, please contact our
factory customer service department at:
1-800-386-0191
Please have the model number, and date of purchase available for reference when calling.
MODEL NUMBER: 19220
DATE of PURCHASE:
It is the owner and/or operators responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to
operation of this product. The owner/operator shall retain product instructions for future
reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed
with the operator’s native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood prior
to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating the product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-386-0191
This instruction manual is intended for your benefit. Please read and follow the safety,
installation, maintenance and troubleshooting steps described within to ensure your safety
and satisfaction. The contents of this instruction manual are based upon the latest product
information available at the time of publication. The manufacturer reserves the right to make
product changes at any time without notice.
2
3
INTRODUCTION
Read and understand this entire instruction manual before attempting
to assemble, install, operate or maintain the product. Failure to comply
with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when
using this product:
Indicates an imminently hazardous situation that, if not avoided, WILL result
in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in
minor or moderate injury.
Indicates important information, which if not followed, may cause damage
to equipment.
SAFETY ALERT
UNPACKING & INSPECTION
Summary of Contents for 19220
Page 12: ...22 23 NOTES NOTES ...