background image

SAFETY ALERT

Read and understand this entire instruction manual before

attempting to assemble, install, operate or maintain this

spray gun. Failure to comply with the instructions may result in serious personal

injury and/or property damage!

The following signal words are used to emphasize safety warnings that must be fol-

lowed when using this product:

Indicates an imminently hazardous situation that, if not

avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoid-

ed, COULD result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoid-

ed, MAY result in minor or moderate injury.

Indicates important information, which if not followed, MAY

cause damage to equipment.

UNPACKING & INSPECTION

After opening the carton, unpack your new spray gun and related parts & accessories.

Please inspect it carefully for any damage that may have occurred during transit.

Please check it against the photograph on carton. If any parts are missing, please call

factory customer service at 1-800-386-0191.

Do not operate this spray gun if damaged during shipment,

handling or misuse. Do not operate the spray gun until the

parts have been replaced or the fault rectified. Failure to do so may result in serious

personal injury or property damage.

All damaged parts must be repaired or replaced as needed prior to operating this

spray gun.

Check to see that all nuts, bolts and fittings are secure before putting this tool into

service. If you have any questions, or require assistance with damaged or missing

parts, please contact our factory customer service department at:

1

1--8

80

00

0--3

38

86

6--0

01

19

91

1

Please have the model number, and date of purchase available for refer-

ence when calling.

MODEL NUMBER:

____ _________________________

DATE of PURCHASE:  _____________________________

2

3

INTRODUCTION

It is the owner and/or operator’s responsibility to study all WARNINGS, operating, and

maintenance instructions contained on the product label and instruction manual prior

to operation of this spray gun. The owner/operator shall retain product instructions

for future reference.

The owner and/or operator are responsible for maintenance, maintaining all decals or

warning labels and while in use, maintaining the unit in good working order. If the

owner and/or operator are not fluent in English, the product warnings and instruc-

tions shall be read and discussed with the operator’s native language by the purchas-

er/owner or his designee. Make sure that the operator comprehends its contents.

Safety information shall be emphasized and understood prior to usage. The spray gun

shall be inspected per the operating instructions.

Users of this spray gun must fully understand these instructions. Each person operat-

ing this spray gun must also be of sound mind and body and must not be under the

influence of any substance that might impair their vision, dexterity, or judgment.

Protect yourself and others by observing all safety information.

Failure to comply with instructions could result in personal injury and/or property

damage! 

If you encounter any problems or difficulties, please contact our customer service

department at:

1

1--8

80

00

0--3

38

86

6--0

01

19

91

1

This instruction manual is intended for your benefit. Please read and follow the safe-

ty, installation, maintenance and troubleshooting steps described within to ensure

your safety and satisfaction. The contents of this instruction manual are based upon

the latest product information available at the time of publication. The manufacturer

reserves the right to make product changes at any time without notice. 

Summary of Contents for HVLP














Reviews: