8
The coil assembly must be replaced after a period of extended use. A coil assembly typically lasts from
about a week to a month, depending on the frequency of use and the type of e liquid used. The CE5 will
need to be disassembled in order to replace the coil assembly.
Before proceeding, remove the CE5 from the battery.
All of the components are threaded together. Disassemble the unit by unscrewing the tip and clear tank
from the knurled base. Rinse out the tank with tap water then pat dry.
The coil can now be removed and replaced by unscrewing it from the lower body.
While assembling and disassembling the CE5 unit, be sure to inspect the components and o-rings for any
damage. A damaged unit can result in leakage or premature failure. Replace the CE5 unit if any body
components are damaged or worn.
To re-assemble, gently screw the components together. When attaching the clear body to the base, give
the reservoir body a spin while inserting the base to ensure the wicking material does not get caught in
the bottom threads.
For additional troubleshooting information and FAQ please refer to the troubleshooting section in this
manual or visit our website at http://www.vapify.us.
Summary of Contents for Fogbank
Page 1: ...v1 3 ...
