Instructions For Use
First turn the fan setting to the High ( H ) position, then turn the unit on by pressing the
on switch to the On position. Once you hear the fan has engaged and is up to speed, you
can immediately turn the fan to the Low ( L ) position and begin using.
*Make sure the fan is on low when heating up your Vapir ONE.
1.
Pre-heat unit by setting the temperature (+/-) and pressing
the Heat button.
2.
Fill Herb Disk.
3.
When Ready light turns from red to green, insert
disk into drive. Insert drive into unit. Begin
inhaling aroma and flavor immediately. Enjoy.
i
HELPFUL HINT: FILLING THE HERB DISK
Whenever possible, grind herbs before filling disk. This will allow your materials to be heated
more evenly.
Loosely fill the finely ground herbs because over packing it can cause overheating.
Removing the herb disk after use
3.
Remove the drawer from the Vapir ONE unit. Without
touching the hot disk, shake the drawer and allow the disk to
fall into a metal or ceramic bowl.
1.
Eject the Herb Disk Drive by pressing release switch and
pulling out the drawer.
2.
Use the supplied plastic tweezers to carefully
remove the hot herb disk. Never touch the disk
right after use!
OR...
IMPORTANT:
In order to prevent burning your herbs, the herb drawer should be
removed every time PRIOR to turning the fan speed up. Once fan speed has been
changed and is up to proper running speed you can insert the herb drawer and
immediately being vaporizing
i
It’s as easy as 1-2-3
Summary of Contents for One V5.0
Page 1: ...USER S GUIDE V5 0 ...