Vapor Expert(PY-001)Portable Nebulizer – Instruction Manual
DISINFECTION
Medical cup can be disinfected by boiling in hot water. After 10 to 30 minutes of boiling,
shake off excessive water from the cup and let them dry on a clean, lint free (paper) towel.
Main unit, mask, mouth piece can Not be boiled.
TROUBLE SHOOTING:
After checking the followings, if any problem still persists, please return the
appliance to your dealer for servicing.
Cause of failure
Causes and reaction measures
Push power button ,
but no operation
1. Check if the battery voltage is
sufficient?
When the appliance’s red indicator
light is on, the battery power is too
low. Please replace the battery
immediately.
2.
Discard the waste batteries
according to local law.
1. Check the battery is installed correctly?
Open battery cover and check if the battery electrode is
rusted or not.
Cannot nebulize or not
enough mist output
1. Check if the medical cup is filled with appropriate amount
of medicine?
2. The mesh in medical cup blocked by remaining medicine.
Cleaning medical cup, if still can’t solve problem, please
replace a new medical cup.
3. The mesh surface (mesh output) has covered by water or
medication.
Remove water or medication from mesh surface.
4. Medical cup is not installing properly.
Release the medical cup from main body and push it back
again.
Suggestion: Replace a new medical cup per year.