Vaporesso GEN Fit, User Manual

3 ENGLISH

USE INSTRUCATIONS

1.Assemble the Coil & Tank [Refer to FIGURE 1]

Unscrew the bottom cap of the tank. 

Insert the MTX coil.

Screw the bottom cap back.

Screw the 510 thread of the tank onto the mod.

2.Fill the E-liquid [Refer to FIGURE 2]

Unscrew the top cap of the tank.

Inject the e-liquid through the filling holes.

Screw the top cap back.

*If it’s the first time filling the e-liquid, please wait 5 minutes 

for the coil to prime.

3.Adjust the Airflow

Twist the airflow ring to adjust the airflow.

4.Power ON/OFF [Refer to FIGURE 3]

Click the power button five times to power on or power off the 

device.

5.Adjust the Voltage [Refer to FIGURE 3]

Click the power button three times to change the voltage level. 

(3.0V-3.3V-3.5V)

6.Display Functions [Refer to FIGURE 3]

● Battery Level: Check the LED on the top of the Mod. 

● Voltage Level: Check the LED on the side of the Mod. 

7.Start Vaping

The device is both draw-activated and button-activated. Inhale 

directly or long press the power button would active the mod.

8.Charging

Please use the in-box Type-C cable to charge the device.

Charging: 

        Battery Level:       Voltage Level: Breath

Fully Charged:

  Battery Level:       Voltage Level: Stay on 

CAUTIONS

PROTECTIONS

1. Please turn off the device when it is not in use. 

2. Do not leave the charging device unattended. 

3. Do not drop, throw or abuse your device, which may cause 

damage. 

4. Please use a standard USB output charger with proper 

charging current and voltage range. 

5. Keep away from the water or any flammable gas, liquid . 

6. Do not expose the device to direct sunlight, dust, moisture 

or mechanical shock. 

7. Do not expose the device to extreme temperature. 

(Recommended temperature range: -10~60

℃

 /14~140

℉

 while 

using and -10~45

℃

 /14~113

℉

 while storing). 

1. Low / High Resistance / Short-circuit / No Load / Overheat / 

Overtime(8s) Protections:

 The device will stop working and the 

RED battery indicator will breath 5 times then go out.

2. Low Voltage / Over Discharging Protections:

 The device will 

stop working and the RED battery indicator will breath 3 times 

then go out.

3. Over Charging / USD High-voltage Input Protections:

 The 

device will stop charging.